LED Grow Light Manual and Quick Install Guild

Plant Growth Lamp PGL150FAV user’s Manual and Quick Install Guild

SUGGEST HANGING DISTANCE                      SUGGEST LIGHTING TIME
Germination: 24-30 inch                                           Veg: 18 hours ON
Seeding: 24 inch                                                         Flower: 12 hours ON
Veg: 18-24 inch
Flower: 12-18 inch


Grow tips
– The rate of photosynthesis and transpiration are directly affected by temperature, humidity and air flow.
– The perfect temperature and humidity for your plants are found between 75-85 °F and 50%-70% humidity，with plenty of airflow to replenish CO2. PH is 6-6.5. You may add more calcium and magnesium than normally needed.


ASSEMBLY INSTRUCTIONS
-Unbox metal hanger kits, attach 4 small hooks to 4 holes on back side of the light.
-Connect with adjustable rope ratchets. Hang the light above the plants at appropriate height.Plug the power cord to the socket.
















WARRANTY TERMS
-The light can be returned or replaced within 30 days after delivery, in the precondition of non-artificial damage.
-90 days ALL FREE warranty. Free components, repairing and service can be provided within 3 months after delivery.
-3 years of free components can be provided.
-3 months -1 year: free components, buyers only have to pay one-way freight and repairing fees.
-1 year -3 years : Free components. Buyers bear the freight back and forth and repairing fees.


IMPORTANT SAFETY PRECAUCTIONS
Please read the manual thoroughly before attempting to install or operate CWCE Grow Light and keep it for future reference.
Connect the light only to the power sources of the appropriate voltage using the plug received. Protect power cables from being pinched or damaged, especially where the power cable enters the power outlet and the unit.
If the provided plug does not fit your socket, please contact us for help by email immediately. Please do not replace the power cord or plug by yourself, otherwise we are mat responsible for man-made damages.
The system should only be cleaned as directed in the manual. You should seek service by qualified service personnel if any of the following occur
1.The power-supply cord or the plug has been damaged;
2.The unit has been exposed to rain;
3.The unit exhibits a marked change in performance;
4.The unit has been dropped, or its enclosure or chassis is damaged.


GENERAL CARE
-CWCE Grow lights are passively cooled with zero moving components. They are designed for harsh environments and years of maintenance-free performance. Some basic care will keep your lights working at Peak-performance cycle-after-cycle.
-Natural convection removes heat away from the heat sink. In order to properly cool itself, at least one inch of space is required between the fixture and the roof of your grow area. Failure to do so may shorten the fixture’s lifespan.
-To achieve the optimal lifespan and performance of your fixtures, routinely check for and remove excess dust, debris, and mineral build up from heat sink and LED array. Cleaning should always be done with the fixture or using low-pressure compressed air with unplugged from its power source.
-Never use a cloth to clean the diode array, otherwise it may scratch the integrity of the silicon seal, or dislodge diodes entirely.
-To limit degradation, avoid touching the diodes with your hands, even in a powered off state.


CAUTION
-In summer or other hot environment, please use a cooling fan to keep a suitable temperature for your plants.


WARNING
-Do NOT touch while in operation.
-To prevent eye damage, avoid looking directly at the LEDs.
-To reduce the risk of overheating or fire, always allow for adequate ventilation of fixtures and power supplies.