- 10mm 2 pin connectors suitable for SMD 5050 2835 3014 5630 single color LED light strips. One end connect 2-conductor flat extension cable and another end for led strip. These led strip connectors can not work with 10mm led strips, rgb led strip, or non-standard 22awg wire.
- The 5050 connector can penetrate 2pin 8 mm PCB board and 20 gauge wire without stripping. Compatible with both 5v 12v and 24v led tape.
- DIY led strip to wire connector in length you want, no mater board-to-wire input or board-to-board jumper, extension distance and angle are no more problems to you. Compatible with 20 gauge 2 conductor wire, solid wire or stranded wire, Use these 2-pin connector with the 2 core extension cable to get lighting exactly where you want it.
- The led light strip connector is durable and powerful, firmly bite through the led light strip, don’t like old style led connectors only conductive connection, it is a solid connection and much stronger. It can support up to 5A current carrying, which allow you extending longer and safer continuous LED strip lighting by single connector.
Features
- Allow user to attach 2 conductor flat wire according project requirement (Wire Color, Cross Section, length,etc)
- Support big current up to 5A in total
- Good for high density light LED strip,don’t mask light of first LED.
- Gripping LED strip very firmly
How to use 10mm 2 pin connectors
Strip end operation
Wire end operation (if have)
Note: above operation is about non-waterproof version, waterproof types are such similar
Workable LED Strip
- LED Types: SMD5050, SMD5630, SMD5730, SMD335, SMD3535
- LED Quantity Supported: 30~90 LEDs/Meter
All LED strips listed above are Single Color with 2 Soldering Pads on 10mm wide FPCB
Technical Data
| Item Name | Hippo-M for 5050 Single Color 10mm 2 Pin | |||
|---|---|---|---|---|
| Item NO. | SE-N10XB-2 | SE-N10BB-2 | ||
| Strip Protection | IP20 | IP20 | ||
| Type | Strip to wire | Strip to strip joint | ||
| Workable Wire Gauge | 22 ~18 AWG | / | ||
| Workable Wire Cross Sectional Area | 0.34~0.75 mm² | / | ||
| Workable Wire OD | Max 2.1 mm | / | ||
| Polarity QTY | 2 | |||
| Pin Pitch | 5.0mm | |||
| Way of Contact | insulation-piercing contact | |||
| Working Voltage | DC3V~24V | |||
| Rated Current | 5A | |||
| Housing Color (cap/base) | Transparent / Black | |||
| Min.LED Strip Thickness | >0.2mm | |||
| Housing Material | PC | |||
| Pin Material | Phosphor Copper (Cu) | |||
| Flame Retardant Level | UL94v-0 | |||
Remark: The data above are tested under 25℃.
If you have no idea, click >>How to choose a 2 pin connector for a single color led strip lights?
Reviews
There are no reviews yet.