- 12mm 6 pin connectors suitable for SMD 5050 2835 3014 5630 rgb+cct LED light strips. One end connect 6-conductor flat extension cable and another end for led strip. These led strip connectors can not work with 10mm led strips, rgb led strip, or non-standard 22awg wire.
- The 5050 connector can penetrate 6pin 12 mm PCB board and 20 gauge wire without stripping. Compatible with both 5v 12v and 24v led tape.
- DIY led strip to wire connector in length you want, no mater board-to-wire input or board-to-board jumper, extension distance and angle are no more problems to you. Compatible with 20 gauge 6 conductor wire, solid wire or stranded wire, Use these 6-pin connector with the 6 core extension cable to get lighting exactly where you want it.
- The led light strip connector is durable and powerful, firmly bite through the led light strip, don’t like old style led connectors only conductive connection, it is a solid connection and much stronger. It can support up to 5A current carrying, which allow you extending longer and safer continuous LED strip lighting by single connector.
Features
- Allow user to attach 6 conductor flat wire according project requirement (Wire Color, Cross Section, length,etc)
- Support big current
- Good for high density light LED strip,don’t mask light of first LED.
- Gripping LED strip very reliably
How to use 6pin led light strip connectors
Strip end operation
Wire end operation (if have)
Note: above operation is about non-waterproof version, waterproof types are such similar.
Workable LED Strip
- LED Types: RGBWW / RGB+Dimmable
- LED Quantity Supported: 30~90 LEDs/Meter
All LED strip listed above are RGBWW with 6 soldering pads on 12mm wide FPCB
Technical Data
Item Name | Hippo-M 6 pin for RGB+CCT 12mm | |||
---|---|---|---|---|
Item NO. | DJ-N12XB-6 | DJ-N12BB-6 | ||
Strip Protection | IP65 | IP65 | ||
Type | Strip to wire | Strip to strip joint | ||
Workable Wire Gauge | 20 AWG | / | ||
Workable Wire Cross Sectional Area | 0.5 mm² | / | ||
Workable Wire OD | Max 2.1 mm | / | ||
Pin Pitch | 2.4mm | |||
Way of Contact | insulation-piercing contact | |||
Working Voltage | DC3V~24V | |||
Rated Current | 5A | |||
Polarity QTY | 6 | |||
Housing Color (cap/base) | Transparent / Black | |||
Min.LED Strip Thickness | >0.2mm | |||
Housing Material | PC | |||
Pin Material | Phosphor Copper (Cu) | |||
Flame Retardant Level | UL94v-0 |
Remark: The data above are tested under 25℃.
If you have no idea, click >>
How to choose a led strip connector for a RGB/RGBW led light strip?
Reviews
There are no reviews yet.