- CONNECT TAPE TO WIRE - No soldering, quick and flexible connection. The 2 pin Led Strip Connector suitable for 8mm width SMD 3528 2835 3014 5630 single color LED light strip. One end connect 2-conductor flat extension cable and another end for led strip. These led strip connectors can not work with 10mm led strips, rgb led strip.
- NOT PICKY ABOUT WIRES - Work for 24awg, 22awg, 20awg, 18awg solid wire, stranded wire and fused wire etc. Only need to press the stripped wire into the slot to firmly connect and conduct. It avoids the dilemma that other connectors can't pierce the wires or can't be turned on or difficult to reuse.
- SUPPORT UP TO 6A CURRENT CARRYING - Compatible with 5v, 12v, 24v led strips, allow you to connect longer LED strips by one LED connector. DIY led strip to wire connection length you want, no mater strip-to-wire extension or strip-to-strip jumper, free from the limit of terminal position
- COMPATIBLE WITH WATERPROOF STRIPS - Should peel off covered silicon on the surface around soldering line area, if you want to connect WATERPROOF LED strip light.
-
-
- 2 pin 8mm led strip connectors suitable for SMD 3528 2835 3014 5630 single color LED light strips. One end connect 2-conductor flat extension cable and another end for led strip. These led strip connectors can not work with 10mm led strips, rgb led strip, or non-standard 22awg wire.
- The 3528 connector can penetrate 2pin 8 mm PCB board and 20 gauge wire without stripping. Compatible with both 5v 12v and 24v led tape. Should peel off covered silicon on the surface around soldering line area, if you want to connect WATERPROOF LED strip light.
- DIY led strip to wire connector in length you want, no mater board-to-wire input or board-to-board jumper, extension distance and angle are no more problems to you. Compatible with 20 gauge 2 conductor wire, solid wire or stranded wire, Use these 2-pin connector with the 2 core extension cable to get lighting exactly where you want it.
- The led light strip connector is durable and powerful, firmly bite through the led light strip, don’t like old style led connectors only conductive connection, it is a solid connection and much stronger. It can support up to 5A current carrying, which allow you extending longer and safer continuous LED strip lighting by single connector.
-
- 2 pin 8mm led strip connectors suitable for SMD 3528 2835 3014 5630 single color LED light strips. One end connect 2-conductor flat extension cable and another end for led strip. These led strip connectors can not work with 10mm led strips, rgb led strip, or non-standard 22awg wire.
- The 3528 connector can penetrate 2pin 8 mm PCB board and 20 gauge wire without stripping. Compatible with both 5v 12v and 24v led tape.
- DIY led strip to wire connector in length you want, no mater board-to-wire input or board-to-board jumper, extension distance and angle are no more problems to you. Compatible with 20 gauge 2 conductor wire, solid wire or stranded wire, Use these 2-pin connector with the 2 core extension cable to get lighting exactly where you want it.
- The led light strip connector is durable and powerful, firmly bite through the led light strip, don’t like old style led connectors only conductive connection, it is a solid connection and much stronger. It can support up to 5A current carrying, which allow you extending longer and safer continuous LED strip lighting by single connector.
-
- 2 pin 8mm led strip connectors suitable for SMD 3528 2835 3014 5630 single color LED light strips. One end connect 2-conductor flat extension cable and another end for led strip. These led strip connectors can not work with 10mm led strips, rgb led strip, or non-standard 22awg wire.
- The 3528 connector can penetrate 2pin 8 mm PCB board and 20 gauge wire without stripping. Compatible with both 5v 12v and 24v led tape.
- DIY led strip to wire connector in length you want, no mater board-to-wire input or board-to-board jumper, extension distance and angle are no more problems to you. Compatible with 20 gauge 2 conductor wire, solid wire or stranded wire, Use these 2-pin connector with the 2 core extension cable to get lighting exactly where you want it.
- The led light strip connector is durable and powerful, firmly bite through the led light strip, don’t like old style led connectors only conductive connection, it is a solid connection and much stronger. It can support up to 5A current carrying, which allow you extending longer and safer continuous LED strip lighting by single connector.
-
- 10mm 2 pin connectors suitable for SMD 5050 2835 3014 5630 single color LED light strips. One end connect 2-conductor flat extension cable and another end for led strip. These led strip connectors can not work with 10mm led strips, rgb led strip, or non-standard 22awg wire.
- The 5050 connector can penetrate 2pin 8 mm PCB board and 20 gauge wire without stripping. Compatible with both 5v 12v and 24v led tape.
- DIY led strip to wire connector in length you want, no mater board-to-wire input or board-to-board jumper, extension distance and angle are no more problems to you. Compatible with 20 gauge 2 conductor wire, solid wire or stranded wire, Use these 2-pin connector with the 2 core extension cable to get lighting exactly where you want it.
- The led light strip connector is durable and powerful, firmly bite through the led light strip, don’t like old style led connectors only conductive connection, it is a solid connection and much stronger. It can support up to 5A current carrying, which allow you extending longer and safer continuous LED strip lighting by single connector.
-
- 10mm 2 pin connectors suitable for SMD 5050 2835 3014 5630 single color LED light strips. One end connect 2-conductor flat extension cable and another end for led strip. These led strip connectors can not work with 10mm led strips, rgb led strip, or non-standard 22awg wire.
- The 5050 connector can penetrate 2pin 8 mm PCB board and 20 gauge wire without stripping. Compatible with both 5v 12v and 24v led tape.
- DIY led strip to wire connector in length you want, no mater board-to-wire input or board-to-board jumper, extension distance and angle are no more problems to you. Compatible with 20 gauge 2 conductor wire, solid wire or stranded wire, Use these 2-pin connector with the 2 core extension cable to get lighting exactly where you want it.
- The led light strip connector is durable and powerful, firmly bite through the led light strip, don’t like old style led connectors only conductive connection, it is a solid connection and much stronger. It can support up to 5A current carrying, which allow you extending longer and safer continuous LED strip lighting by single connector.
-
- 10mm 2 pin connectors suitable for SMD 5050 2835 3014 5630 single color LED light strips. One end connect 2-conductor flat extension cable and another end for led strip. These led strip connectors can not work with 10mm led strips, rgb led strip, or non-standard 22awg wire.
- The 5050 connector can penetrate 2pin 8 mm PCB board and 20 gauge wire without stripping. Compatible with both 5v 12v and 24v led tape.
- DIY led strip to wire connector in length you want, no mater board-to-wire input or board-to-board jumper, extension distance and angle are no more problems to you. Compatible with 20 gauge 2 conductor wire, solid wire or stranded wire, Use these 2-pin connector with the 2 core extension cable to get lighting exactly where you want it.
- The led light strip connector is durable and powerful, firmly bite through the led light strip, don’t like old style led connectors only conductive connection, it is a solid connection and much stronger. It can support up to 5A current carrying, which allow you extending longer and safer continuous LED strip lighting by single connector.
-
- 10mm 2 pin connectors suitable for SMD 5050 2835 3014 5630 single color LED light strips. One end connect 2-conductor flat extension cable and another end for led strip. These led strip connectors can not work with 10mm led strips, rgb led strip, or non-standard 22awg wire.
- The 5050 connector can penetrate 2pin 8 mm PCB board and 20 gauge wire without stripping. Compatible with both 5v 12v and 24v led tape.
- DIY led strip to wire connector in length you want, no mater board-to-wire input or board-to-board jumper, extension distance and angle are no more problems to you. Compatible with 20 gauge 2 conductor wire, solid wire or stranded wire, Use these 2-pin connector with the 2 core extension cable to get lighting exactly where you want it.
- The led light strip connector is durable and powerful, firmly bite through the led light strip, don’t like old style led connectors only conductive connection, it is a solid connection and much stronger. It can support up to 5A current carrying, which allow you extending longer and safer continuous LED strip lighting by single connector.
-
- 10mm 4 pin connectors suitable for SMD 5050 2835 3014 5630 single color LED light strips. One end connect 4-conductor flat extension cable and another end for led strip. These led strip connectors can not work with 10mm led strips, rgb led strip, or non-standard 22awg wire.
- The 5050 connector can penetrate 4pin 10 mm PCB board and 20 gauge wire without stripping. Compatible with both 5v 12v and 24v led tape.
- DIY led strip to wire connector in length you want, no mater board-to-wire input or board-to-board jumper, extension distance and angle are no more problems to you. Compatible with 20 gauge 4 conductor wire, solid wire or stranded wire, Use these 4-pin connector with the 4 core extension cable to get lighting exactly where you want it.
- The led light strip connector is durable and powerful, firmly bite through the led light strip, don’t like old style led connectors only conductive connection, it is a solid connection and much stronger. It can support up to 5A current carrying, which allow you extending longer and safer continuous LED strip lighting by single connector.
-
- 10mm 2 pin connectors suitable for SMD 5050 2835 3014 5630 single color LED light strips. One end connect 2-conductor flat extension cable and another end for led strip. These led strip connectors can not work with 10mm led strips, rgb led strip, or non-standard 22awg wire.
- The 5050 connector can penetrate 2pin 8 mm PCB board and 20 gauge wire without stripping. Compatible with both 5v 12v and 24v led tape.
- DIY led strip to wire connector in length you want, no mater board-to-wire input or board-to-board jumper, extension distance and angle are no more problems to you. Compatible with 20 gauge 2 conductor wire, solid wire or stranded wire, Use these 2-pin connector with the 2 core extension cable to get lighting exactly where you want it.
- The led light strip connector is durable and powerful, firmly bite through the led light strip, don’t like old style led connectors only conductive connection, it is a solid connection and much stronger. It can support up to 5A current carrying, which allow you extending longer and safer continuous LED strip lighting by single connector.
-
- 12mm 5 pin connectors suitable for SMD 5050 2835 3014 5630 rgbw LED light strips. One end connect 5-conductor flat extension cable and another end for led strip. These led strip connectors can not work with 10mm led strips, rgb led strip, or non-standard 22awg wire.
- The 5050 connector can penetrate 5pin 12 mm PCB board and 20 gauge wire without stripping. Compatible with both 5v 12v and 24v led tape.
- DIY led strip to wire connector in length you want, no mater board-to-wire input or board-to-board jumper, extension distance and angle are no more problems to you. Compatible with 20 gauge 5 conductor wire, solid wire or stranded wire, Use these 5-pin connector with the 5 core extension cable to get lighting exactly where you want it.
- The led light strip connector is durable and powerful, firmly bite through the led light strip, don’t like old style led connectors only conductive connection, it is a solid connection and much stronger. It can support up to 5A current carrying, which allow you extending longer and safer continuous LED strip lighting by single connector.
-
- 12mm 6 pin connectors suitable for SMD 5050 2835 3014 5630 rgb+cct LED light strips. One end connect 6-conductor flat extension cable and another end for led strip. These led strip connectors can not work with 10mm led strips, rgb led strip, or non-standard 22awg wire.
- The 5050 connector can penetrate 6pin 12 mm PCB board and 20 gauge wire without stripping. Compatible with both 5v 12v and 24v led tape.
- DIY led strip to wire connector in length you want, no mater board-to-wire input or board-to-board jumper, extension distance and angle are no more problems to you. Compatible with 20 gauge 6 conductor wire, solid wire or stranded wire, Use these 6-pin connector with the 6 core extension cable to get lighting exactly where you want it.
- The led light strip connector is durable and powerful, firmly bite through the led light strip, don’t like old style led connectors only conductive connection, it is a solid connection and much stronger. It can support up to 5A current carrying, which allow you extending longer and safer continuous LED strip lighting by single connector.
-
- 12mm 6 pin connectors suitable for SMD 5050 2835 3014 5630 rgb+cct LED light strips. One end connect 6-conductor flat extension cable and another end for led strip. These led strip connectors can not work with 10mm led strips, rgb led strip, or non-standard 22awg wire.
- The 5050 connector can penetrate 6pin 12 mm PCB board and 20 gauge wire without stripping. Compatible with both 5v 12v and 24v led tape.
- DIY led strip to wire connector in length you want, no mater board-to-wire input or board-to-board jumper, extension distance and angle are no more problems to you. Compatible with 20 gauge 6 conductor wire, solid wire or stranded wire, Use these 6-pin connector with the 6 core extension cable to get lighting exactly where you want it.
- The led light strip connector is durable and powerful, firmly bite through the led light strip, don’t like old style led connectors only conductive connection, it is a solid connection and much stronger. It can support up to 5A current carrying, which allow you extending longer and safer continuous LED strip lighting by single connector.
-
- UNIFORM WIRE CONNECTORS: our solderless low voltage wire t tap connectorsare innovative clasp connection design, eliminating the trouble of stripping, hinging and welding, just insert the wire properly, push down the cover with pliers. These t pins connector compatible with 20 / 22 AWG cable.
- SAFER BUTT CONNECTORS: No wire-stripping required. No need to peel the wire or break the wire jacket. The wire nuts saves time and greatly reduces human error. Use these wire terminals to realize the wires connected with standard and uniform operation, free of worrying the short-circuiting, and the circuit leakage caused by non-standard connecting.
- MAKE CONNECTING WIRES EASIER: The butt connector is nice for making simple circuits without having to really do anything. just need to plug the electrical wire into wire splice, clamp the pliers, Makes splicing wires so much easier than crimps.
- SMALLER SIZE, THE SMALLER SPACE REQUIREMENTS. The wire connectors perfect for all vehicle, audio, video, speaker, led strip lights installation and other electrical equipments.
- PATENT DESIGN: say goodbye to slow process of stripping and twisting, easy to get perfect connection between wires
-
- UNIFORM WIRE CONNECTORS: our solderless low voltage wire t tap connectorsare innovative clasp connection design, eliminating the trouble of stripping, hinging and welding, just insert the wire properly, push down the cover with pliers. These t pins connector compatible with 20 / 22 AWG cable.
- SAFER BUTT CONNECTORS: No wire-stripping required. No need to peel the wire or break the wire jacket. The wire nuts saves time and greatly reduces human error. Use these wire terminals to realize the wires connected with standard and uniform operation, free of worrying the short-circuiting, and the circuit leakage caused by non-standard connecting.
- MAKE CONNECTING WIRES EASIER: The butt connector is nice for making simple circuits without having to really do anything. just need to plug the electrical wire into wire splice, clamp the pliers, Makes splicing wires so much easier than crimps.
- SMALLER SIZE, THE SMALLER SPACE REQUIREMENTS. The wire connectors perfect for all vehicle, audio, video, speaker, led strip lights installation and other electrical equipments.
- PATENT DESIGN: say goodbye to slow process of stripping and twisting, easy to get perfect connection between wires
-
- UNIFORM WIRE CONNECTORS: our solderless low voltage wire t tap connectorsare innovative clasp connection design, eliminating the trouble of stripping, hinging and welding, just insert the wire properly, push down the cover with pliers. These t pins connector compatible with 20 / 22 AWG cable.
- SAFER BUTT CONNECTORS: No wire-stripping required. No need to peel the wire or break the wire jacket. The wire nuts saves time and greatly reduces human error. Use these wire terminals to realize the wires connected with standard and uniform operation, free of worrying the short-circuiting, and the circuit leakage caused by non-standard connecting.
- MAKE CONNECTING WIRES EASIER: The butt connector is nice for making simple circuits without having to really do anything. just need to plug the electrical wire into wire splice, clamp the pliers, Makes splicing wires so much easier than crimps.
- SMALLER SIZE, THE SMALLER SPACE REQUIREMENTS. The wire connectors perfect for all vehicle, audio, video, speaker, led strip lights installation and other electrical equipments.
- PATENT DESIGN: say goodbye to slow process of stripping and twisting, easy to get perfect connection between wires
-
- UNIFORM WIRE CONNECTORS: our solderless low voltage wire t tap connectorsare innovative clasp connection design, eliminating the trouble of stripping, hinging and welding, just insert the wire properly, push down the cover with pliers. These t pins connector compatible with 20 / 22 AWG cable.
- SAFER BUTT CONNECTORS: No wire-stripping required. No need to peel the wire or break the wire jacket. The wire nuts saves time and greatly reduces human error. Use these wire terminals to realize the wires connected with standard and uniform operation, free of worrying the short-circuiting, and the circuit leakage caused by non-standard connecting.
- MAKE CONNECTING WIRES EASIER: The butt connector is nice for making simple circuits without having to really do anything. just need to plug the electrical wire into wire splice, clamp the pliers, Makes splicing wires so much easier than crimps.
- SMALLER SIZE, THE SMALLER SPACE REQUIREMENTS. The wire connectors perfect for all vehicle, audio, video, speaker, led strip lights installation and other electrical equipments.
- PATENT DESIGN: say goodbye to slow process of stripping and twisting, easy to get perfect connection between wires
-
- UNIFORM WIRE CONNECTORS: our solderless low voltage wire t tap connectorsare innovative clasp connection design, eliminating the trouble of stripping, hinging and welding, just insert the wire properly, push down the cover with pliers. These t pins connector compatible with 20 / 22 AWG cable.
- SAFER BUTT CONNECTORS: No wire-stripping required. No need to peel the wire or break the wire jacket. The wire nuts saves time and greatly reduces human error. Use these wire terminals to realize the wires connected with standard and uniform operation, free of worrying the short-circuiting, and the circuit leakage caused by non-standard connecting.
- MAKE CONNECTING WIRES EASIER: The butt connector is nice for making simple circuits without having to really do anything. just need to plug the electrical wire into wire splice, clamp the pliers, Makes splicing wires so much easier than crimps.
- SMALLER SIZE, THE SMALLER SPACE REQUIREMENTS. The wire connectors perfect for all vehicle, audio, video, speaker, led strip lights installation and other electrical equipments.
- PATENT DESIGN: say goodbye to slow process of stripping and twisting, easy to get perfect connection between wires
-
- UNIFORM WIRE CONNECTORS: our solderless low voltage wire t tap connectorsare innovative clasp connection design, eliminating the trouble of stripping, hinging and welding, just insert the wire properly, push down the cover with pliers. These t pins connector compatible with 20 / 22 AWG cable.
- SAFER BUTT CONNECTORS: No wire-stripping required. No need to peel the wire or break the wire jacket. The wire nuts saves time and greatly reduces human error. Use these wire terminals to realize the wires connected with standard and uniform operation, free of worrying the short-circuiting, and the circuit leakage caused by non-standard connecting.
- MAKE CONNECTING WIRES EASIER: The butt connector is nice for making simple circuits without having to really do anything. just need to plug the electrical wire into wire splice, clamp the pliers, Makes splicing wires so much easier than crimps.
- SMALLER SIZE, THE SMALLER SPACE REQUIREMENTS. The wire connectors perfect for all vehicle, audio, video, speaker, led strip lights installation and other electrical equipments.
- PATENT DESIGN: say goodbye to slow process of stripping and twisting, easy to get perfect connection between wires
-
- UNIFORM WIRE CONNECTORS: our solderless low voltage wire t tap connectorsare innovative clasp connection design, eliminating the trouble of stripping, hinging and welding, just insert the wire properly, push down the cover with pliers. These t pins connector compatible with 20 / 22 AWG cable.
- SAFER BUTT CONNECTORS: No wire-stripping required. No need to peel the wire or break the wire jacket. The wire nuts saves time and greatly reduces human error. Use these wire terminals to realize the wires connected with standard and uniform operation, free of worrying the short-circuiting, and the circuit leakage caused by non-standard connecting.
- MAKE CONNECTING WIRES EASIER: The butt connector is nice for making simple circuits without having to really do anything. just need to plug the electrical wire into wire splice, clamp the pliers, Makes splicing wires so much easier than crimps.
- SMALLER SIZE, THE SMALLER SPACE REQUIREMENTS. The wire connectors perfect for all vehicle, audio, video, speaker, led strip lights installation and other electrical equipments.
- PATENT DESIGN: say goodbye to slow process of stripping and twisting, easy to get perfect connection between wires
-
- UNIFORM WIRE CONNECTORS: our solderless low voltage wire t tap connectorsare innovative clasp connection design, eliminating the trouble of stripping, hinging and welding, just insert the wire properly, push down the cover with pliers. These t pins connector compatible with 20 / 22 AWG cable.
- SAFER BUTT CONNECTORS: No wire-stripping required. No need to peel the wire or break the wire jacket. The wire nuts saves time and greatly reduces human error. Use these wire terminals to realize the wires connected with standard and uniform operation, free of worrying the short-circuiting, and the circuit leakage caused by non-standard connecting.
- MAKE CONNECTING WIRES EASIER: The butt connector is nice for making simple circuits without having to really do anything. just need to plug the electrical wire into wire splice, clamp the pliers, Makes splicing wires so much easier than crimps.
- SMALLER SIZE, THE SMALLER SPACE REQUIREMENTS. The wire connectors perfect for all vehicle, audio, video, speaker, led strip lights installation and other electrical equipments.
- PATENT DESIGN: say goodbye to slow process of stripping and twisting, easy to get perfect connection between wires
-
- UNIFORM WIRE CONNECTORS: our solderless low voltage wire t tap connectorsare innovative clasp connection design, eliminating the trouble of stripping, hinging and welding, just insert the wire properly, push down the cover with pliers. These t pins connector compatible with 20 / 22 AWG cable.
- SAFER BUTT CONNECTORS: No wire-stripping required. No need to peel the wire or break the wire jacket. The wire nuts saves time and greatly reduces human error. Use these wire terminals to realize the wires connected with standard and uniform operation, free of worrying the short-circuiting, and the circuit leakage caused by non-standard connecting.
- MAKE CONNECTING WIRES EASIER: The butt connector is nice for making simple circuits without having to really do anything. just need to plug the electrical wire into wire splice, clamp the pliers, Makes splicing wires so much easier than crimps.
- SMALLER SIZE, THE SMALLER SPACE REQUIREMENTS. The wire connectors perfect for all vehicle, audio, video, speaker, led strip lights installation and other electrical equipments.
- PATENT DESIGN: say goodbye to slow process of stripping and twisting, easy to get perfect connection between wires
-
- UNIFORM WIRE CONNECTORS: our solderless low voltage wire t tap connectorsare innovative clasp connection design, eliminating the trouble of stripping, hinging and welding, just insert the wire properly, push down the cover with pliers. These t pins connector compatible with 20 / 22 AWG cable.
- SAFER BUTT CONNECTORS: No wire-stripping required. No need to peel the wire or break the wire jacket. The wire nuts saves time and greatly reduces human error. Use these wire terminals to realize the wires connected with standard and uniform operation, free of worrying the short-circuiting, and the circuit leakage caused by non-standard connecting.
- MAKE CONNECTING WIRES EASIER: The butt connector is nice for making simple circuits without having to really do anything. just need to plug the electrical wire into wire splice, clamp the pliers, Makes splicing wires so much easier than crimps.
- SMALLER SIZE, THE SMALLER SPACE REQUIREMENTS. The wire connectors perfect for all vehicle, audio, video, speaker, led strip lights installation and other electrical equipments.
- PATENT DESIGN: say goodbye to slow process of stripping and twisting, easy to get perfect connection between wires
-
- UNIFORM WIRE CONNECTORS: our solderless low voltage wire t tap connectorsare innovative clasp connection design, eliminating the trouble of stripping, hinging and welding, just insert the wire properly, push down the cover with pliers. These t pins connector compatible with 20 / 22 AWG cable.
- SAFER BUTT CONNECTORS: No wire-stripping required. No need to peel the wire or break the wire jacket. The wire nuts saves time and greatly reduces human error. Use these wire terminals to realize the wires connected with standard and uniform operation, free of worrying the short-circuiting, and the circuit leakage caused by non-standard connecting.
- MAKE CONNECTING WIRES EASIER: The butt connector is nice for making simple circuits without having to really do anything. just need to plug the electrical wire into wire splice, clamp the pliers, Makes splicing wires so much easier than crimps.
- SMALLER SIZE, THE SMALLER SPACE REQUIREMENTS. The wire connectors perfect for all vehicle, audio, video, speaker, led strip lights installation and other electrical equipments.
- PATENT DESIGN: say goodbye to slow process of stripping and twisting, easy to get perfect connection between wires
-
- UNIFORM WIRE CONNECTORS: our solderless low voltage wire t tap connectorsare innovative clasp connection design, eliminating the trouble of stripping, hinging and welding, just insert the wire properly, push down the cover with pliers. These t pins connector compatible with 20 / 22 AWG cable.
- SAFER BUTT CONNECTORS: No wire-stripping required. No need to peel the wire or break the wire jacket. The wire nuts saves time and greatly reduces human error. Use these wire terminals to realize the wires connected with standard and uniform operation, free of worrying the short-circuiting, and the circuit leakage caused by non-standard connecting.
- MAKE CONNECTING WIRES EASIER: The butt connector is nice for making simple circuits without having to really do anything. just need to plug the electrical wire into wire splice, clamp the pliers, Makes splicing wires so much easier than crimps.
- SMALLER SIZE, THE SMALLER SPACE REQUIREMENTS. The wire connectors perfect for all vehicle, audio, video, speaker, led strip lights installation and other electrical equipments.
- PATENT DESIGN: say goodbye to slow process of stripping and twisting, easy to get perfect connection between wires
-
- UNIFORM WIRE CONNECTORS: our solderless low voltage wire t tap connectorsare innovative clasp connection design, eliminating the trouble of stripping, hinging and welding, just insert the wire properly, push down the cover with pliers. These t pins connector compatible with 20 / 22 AWG cable.
- SAFER BUTT CONNECTORS: No wire-stripping required. No need to peel the wire or break the wire jacket. The wire nuts saves time and greatly reduces human error. Use these wire terminals to realize the wires connected with standard and uniform operation, free of worrying the short-circuiting, and the circuit leakage caused by non-standard connecting.
- MAKE CONNECTING WIRES EASIER: The butt connector is nice for making simple circuits without having to really do anything. just need to plug the electrical wire into wire splice, clamp the pliers, Makes splicing wires so much easier than crimps.
- SMALLER SIZE, THE SMALLER SPACE REQUIREMENTS. The wire connectors perfect for all vehicle, audio, video, speaker, led strip lights installation and other electrical equipments.
- PATENT DESIGN: say goodbye to slow process of stripping and twisting, easy to get perfect connection between wires
-
- UNIFORM WIRE CONNECTORS: our solderless low voltage wire t tap connectorsare innovative clasp connection design, eliminating the trouble of stripping, hinging and welding, just insert the wire properly, push down the cover with pliers. These t pins connector compatible with 20 / 22 AWG cable.
- SAFER BUTT CONNECTORS: No wire-stripping required. No need to peel the wire or break the wire jacket. The wire nuts saves time and greatly reduces human error. Use these wire terminals to realize the wires connected with standard and uniform operation, free of worrying the short-circuiting, and the circuit leakage caused by non-standard connecting.
- MAKE CONNECTING WIRES EASIER: The butt connector is nice for making simple circuits without having to really do anything. just need to plug the electrical wire into wire splice, clamp the pliers, Makes splicing wires so much easier than crimps.
- SMALLER SIZE, THE SMALLER SPACE REQUIREMENTS. The wire connectors perfect for all vehicle, audio, video, speaker, led strip lights installation and other electrical equipments.
- PATENT DESIGN: say goodbye to slow process of stripping and twisting, easy to get perfect connection between wires
-
Dimming function or on off function are selectable Easy to be fixed with high bay for the special clip 5.8GHz frequencyand built-in daylight sensor, auto turn on lights according to movement and daylight lux Automatic dimming when used in combination with 0-10Vdimmable LED drivers or ballasts. Detection area, time delay and daylight threshold can be precisely set via DIP switch. Wide detection area, range up to 16m in diameter and mounting height 15M Max. suitable for warehouse use. Suitable for warehouse, high bay and tri-poof light -
Operating voltage 120~277V AC, suitable to Euro & North American market. Patented microwave antenna, mounting height is 15m Max, suitable to install in most of warehouses. Supports high-sensitivity and low-sensitivity modes (for metal ceilings, metal reflector mounting environments) Work with 1-10V dimmable LED driver, easy to achieve 2-step or 3-step dimming function. -
Operating voltage 120~277V AC, suitable to Euro & North American market. Patented microwave antenna, mounting height is 15m Max, suitable to install in most of warehouses. Supports high-sensitivity and low-sensitivity modes (for metal ceilings, metal reflector mounting environments) Work with 1-10V dimmable LED driver, easy to achieve 2-step or 3-step dimming function. -
Operating voltage 120~277V AC, suitable to Euro & North American market. Patented microwave antenna, mounting height is 15m Max, suitable to install in most of warehouses. Supports high-sensitivity and low-sensitivity modes (for metal ceilings, metal reflector mounting environments) Work with 1-10V dimmable LED driver, easy to achieve 2-step or 3-step dimming function. -
Operating voltage 120~277V AC, suitable to Euro & North American market. Patented microwave antenna, mounting height is 15m Max, suitable to install in most of warehouses. Supports high-sensitivity and low-sensitivity modes (for metal ceilings, metal reflector mounting environments) Work with 1-10V dimmable LED driver, easy to achieve 2-step or 3-step dimming function.
-
- UNIFORM WIRE CONNECTORS: our solderless low voltage wire t tap connectorsare innovative clasp connection design, eliminating the trouble of stripping, hinging and welding, just insert the wire properly, push down the cover with pliers. These t pins connector compatible with 20 / 22 AWG cable.
- SAFER BUTT CONNECTORS: No wire-stripping required. No need to peel the wire or break the wire jacket. The wire nuts saves time and greatly reduces human error. Use these wire terminals to realize the wires connected with standard and uniform operation, free of worrying the short-circuiting, and the circuit leakage caused by non-standard connecting.
- MAKE CONNECTING WIRES EASIER: The butt connector is nice for making simple circuits without having to really do anything. just need to plug the electrical wire into wire splice, clamp the pliers, Makes splicing wires so much easier than crimps.
- SMALLER SIZE, THE SMALLER SPACE REQUIREMENTS. The wire connectors perfect for all vehicle, audio, video, speaker, led strip lights installation and other electrical equipments.
- PATENT DESIGN: say goodbye to slow process of stripping and twisting, easy to get perfect connection between wires
-
SOLDERLESS CONNECTION: The L shape 4 pin led light strip connectors suitable for 10mm rgb LED strip lights, provides a perfect 90 degree bend between two rgb led strips without soldering. STRONG APPLICATION: Connects directly to any 4pin 10 mm PCB board. Compatible with both 12v and 24v rgb led strip, addressable led light strip ws2813(upgraded ws2812b led strip). Compatible with both 5050 non-waterproof and waterproof led strips (Please peel off silicon on the surface around soldering line area when install waterproof strips). EASY TO USE: The 4-pin unwired gapless light strip Connector is easy to install. Ideal for right angle corner tape connection. Simply slot the tape light into connector and clamp the cover (no need to solder), No need to worry that they will move or slide out when in use. don’t like old style led strip connectors only conductive connection, it is a solid connection and much stronger. SOLID & EFFECTIVE CONNECTION - Made from fireproof material, the L shape connectors can withstand high temperatures. High quality tin plated copper core and PVC plastic cover ensure steady, safety and long-lasting connection. -
limited time onlyStart Date: Jul 09, 2020 at 12:01 AM PDT | End Date: Jul 11, 2020 at 11:59 PM PDT -
limited time onlyStart Date: Jul 09, 2020 at 12:01 AM PDT | End Date: Jul 18, 2020 at 11:59 PM PDT